Floor Drain Deodorizer Cores

Measure the inner diameter of the drain bore where the core sits — not the visible grate size on the floor. Our cores cover 40mm, 50mm, 60mm and 100mm bores, which account for the vast majority of installed drains worldwide. If the bore falls between sizes, choose the smaller core: the stepped rubber sealing collar flexes outward to grip the wall. Whether the drain has a tailpiece below it does not affect the choice — the core always seats in the drain body above.

Yes — this is the key point of the fitment chart: the core selection depends only on bore diameter. A tailpiece is the pipe stub beneath the drain body that pushes into the waste pipe; it sits below where the core seats, so a 40mm core fits a 40mm-bore drain in both tailpiece and non-tailpiece installations. The same matrix of flap, ABS and magnetic cores applies to both drain types.

Each suits a channel position. Stainless gravity flap is the cheapest and most tolerant of dirty water — the wholesale workhorse. ABS self-sealing has the softest, quietest close and a flexible collar that seals best in uneven old bores — the retrofit favourite. Magnetic-float cores have the strongest positive closure at low water volume and read as premium on retail cards. A balanced importer assortment is roughly 40% stainless flap, 40% ABS, 20% magnetic.

Yes. The flap closes airtight against its silicone seat when flow stops, which blocks the same gas path insects use: drain flies emerge through the water column, and cockroaches climb waste stacks and exit through open drain bores. With the bore sealed by a fitted core and the strainer top keeping hair off the seat, the drain stops being an entry route. For severe infestation cases, also check gaps around the drain body perimeter, which the core does not cover.

Service life depends heavily on water chemistry and usage: hard-water scale and greasy residues are the main wear factors for the sealing elements. Because the unit lifts out without tools, replacement is a tenant-level task: pull the old core, rinse the bore, drop in the new one. Many importers position cores as a permanent retail SKU precisely because the replacement cycle is short and predictable in their local market — we can discuss expected service intervals for your water conditions at RFQ stage.

Yes. Body colour (black/white/grey), strainer-top pattern, sealing-collar dimension and blister-card artwork are all adjustable at export quantities, with barcode assignment and mixed-size display cartons available. Send your market's dominant bore sizes and we will propose the SKU matrix and MOQ that fits your channel.