Floor Drains: Types, Components and Applications Guide
installation 2026-11-18

Floor Drains: Types, Components and Applications Guide

"Floor drain" covers a surprising range of products: a round grate in a bathroom floor, a long channel across a garage door, a stainless trench in a commercial kitchen, a plastic body cast into a slab. They all do the same job - take water away from a floor - but they differ in shape, parts, material and the situations they suit. This guide is the map: what the types are, what a floor drain is made of, how to choose, and where to go for the detail on each type.

Stainless steel square floor drains in three sizes, one with the grate lifted to show the body and outlet

What a Floor Drain Does

A floor drain collects water at the lowest point of a floor and carries it into the drainage system. Three things have to be true for it to work: the floor must slope toward it, the drain must be big enough for the flow, and it must keep sewer gas out of the room. Most mistakes in drain selection come from forgetting one of those three.

The Main Types

Point drains (round and square)

A single opening in the floor, with a round or square grate. The most common type: bathrooms, laundry rooms, balconies, utility rooms. The floor slopes toward the drain from several sides. Compact and inexpensive, and available as stainless steel, plastic or cast iron.

See our floor wastes and point drains for bathroom, balcony and terrace and laundry versions.

Linear (shower channel) drains

A long, narrow channel along a wall or across a doorway. Because the floor slopes in one direction only, it suits large-format tile, curbless showers and wet rooms. Read the linear shower drain selection guide for sizing, slope and installation, or Linear vs Center Shower Drain for the comparison with a point drain. Our range is in linear shower drains.

Trench and channel drains

A longer, larger channel for driveways, patios, decks, garages and commercial floors, normally with a heavier grate. Sized by channel width, depth and run length. Start with the trench and channel drain buyer's guide or the narrower channel drain for driveway article. For commercial kitchens, see the kitchen trench drains.

Gullies and industrial floor drains

Heavy-duty bodies for workshops, garages, plant rooms and basements, built for wheeled traffic when the body is encased in concrete. See our industrial floor gullies for a drain with a removable water seal.

Floor sinks and area drains (US terms)

Two terms you will meet in US specifications. A floor sink is a receptacle, often a square bowl, used where equipment waste drains into it through an air gap rather than being piped directly into the drain. An area drain is a drain set in a paved outdoor or open area to collect surface water. Other markets use other words - "floor waste" in Australia, "gully" in the UK - so check what the specification is really asking for.

What a Floor Drain Is Made Of

Part What it does
Grate or cover The visible surface. Lets water in, keeps debris and feet out. Choose by traffic and cleaning, not just looks.
Strainer or basket Catches hair and debris below the grate. Should lift out for cleaning.
Body The part set in the floor. Holds the water seal or insert and connects to the outlet.
Flange The wide rim at the top of the body. Bonds to the waterproofing membrane in wet areas.
Trap or water seal A bend or cup that holds water and blocks sewer gas.
Outlet The connection to the waste pipe, vertical or side. Match it to the pipe.
Height adjuster or extension Raises or lowers the grate to match the finished floor.
Odor-proof core or insert A drop-in flap, float or membrane that seals the opening when no water flows.

Spare and add-on parts - odor-proof cores, hair strainers and drain connectors - are covered on their own pages.

Water Seals and Odor

Almost every smelly floor drain has a dry trap. The seal is only as good as the last time water went through it. How floor drain water seals fail - and how to protect them explains the five ways a seal is lost and the options: refilling, a deeper seal, a trap primer fitted by your plumber, or a drop-in core.

Materials

  • Stainless steel - the standard choice for visible grates and for drains in wet or hygiene-sensitive areas. 304 is the working grade for most homes and light commercial use; 316 earns its premium near salt air, pools or chemical cleaning. See 304 vs 316 Stainless Steel.
  • Plastic (PVC, ABS, PP) - light, corrosion-proof and common for drain bodies cast into slabs. Often paired with a stainless grate.
  • Cast iron - heavy and robust; typical in older buildings and heavy-duty floors.

Sizes

Outlet size has to match the waste pipe. Residential and light commercial floor drains commonly have outlets from about 40 mm (1.5 inch) to 100 mm (4 inch), with larger sizes in industrial work. The visible grate size is a separate measurement - for a replacement part such as an odor core, measure the inner diameter of the bore, not the grate.

Choosing: Five Questions

  1. Where is it? Bathroom, balcony, garage, kitchen, workshop, outdoors - this narrows the type.
  2. How much water? One showerhead, rain from a roof, or a hose-down floor are very different flows.
  3. What walks or rolls over it? Feet, carts, cars or forklifts decide the grate.
  4. How is the floor built? Floor depth, waterproofing and slope decide body depth, flange and outlet position.
  5. How often is it used? A rarely used drain needs a plan for its water seal.
Application Typical type Key spec
Bathroom or wet room floor Point drain, or linear along a wall Flange for the membrane, outlet match
Curbless shower Linear, wall or threshold Length, slope, tile-in grate option
Balcony or terrace Point drain Outdoor-rated material, freeze plan
Laundry or utility room Point drain, larger bore Flow and outlet size
Driveway, patio or deck Trench or channel Width, depth, grate for the traffic
Garage, basement or workshop Gully or heavy-duty drain Grate strength, removable seal
Commercial kitchen Trench drain Cleanable, grease handling

Where to Go Next

Melody Drain

We manufacture stainless steel floor drains, linear shower drains and channel drains, plus odor-proof cores, strainers and connectors, and fabricate custom stainless parts. Send us the application, floor build-up, outlet size and quantity - or the drawing - and we will come back with a model and spec to review. Contact us or message us on WhatsApp.

Need Technical Guidance?

Our team can help you select the right products and provide technical documentation for your projects.